How to Protect Vape Coils for long lifespan

Coil priming is a critical process, not just a recommendation, to ensure optimal vaping performance. By properly priming your coil, you significantly extend its lifespan and maximize flavor delivery. Our step-by-step guide simplifies this essential process, guaranteeing every puff delivers the same satisfaction as the first.

What is a Vape Coil?

The coil is the heart of your vaping device, the essential component that brings the experience to life. Think of it as the engine within a metal casing, typically constructed with conductive mesh wire (kanthal, nickel, or stainless steel) surrounded by absorbent cotton wicking material. This cotton soaks up the e-liquid, and when the battery sends an electric current through the coil, the wire heats up, vaporizing the e-liquid into flavorful clouds. The synergy between the coil and wick ensures a smooth, consistent conversion of liquid to vapor, delivering the satisfaction of vaping with every puff

How do I prime my vape coil?

Your enjoyment and satisfaction are our top priorities, which is why we’re here to guide you through the essential process of priming your vape coils—ensuring every puff is smooth, flavorful, and free from issues.

Vape Tanks and Coils

‌To prime sub-ohm coils, start by carefully dripping e-liquid into the wicking holes until the cotton is thoroughly saturated—this prevents burning during initial use. Next, install the coil into your vape tank, fill it with e-liquid, and you’re nearly ready to vape.

Prepare your Vape Coil, Tank and chosen E-Liquid

Drip some of the E-Liquid on the visible cotton wick of the Coil.

Place the Coil in the Tank and fill it up with E-Liquid.

Wait at least 5 minutes before firing up your device.

Before taking your first real puff, wait 5 minutes to allow the e-liquid to soak into the wick.

Then, take a few unpowered draws from the mouthpiece to help pull the liquid into the coil.

Next, take a few gentle puffs at a low power setting to ensure the e-liquid fully saturates the coil.

Finally, adjust the power to your preferred level. This simple process not only extends the life of your coil but also enhances the flavor of your vape.

Pod Kits and Coils

‌Priming coils in pod kits is incredibly simple, especially with pre-fitted coils. There’s no need to drip e-liquid directly onto the coil—just fill the pod with your favorite juice while the coil is already installed. The most important step is to let it sit for about 5 minutes, giving the e-liquid enough time to fully saturate the wick. This ensures a smooth, flavorful first draw and avoids any unpleasant burnt taste.

Why is coil priming important?

While some vapers argue that priming coils isn’t essential, the truth is that this simple step significantly enhances your vaping experience in numerous ways.

Optimal Output

Priming your coils is like warming up before a sprint—it ensures everything runs seamlessly when it’s time to go full throttle. By taking the time to prime your coils, you’re setting them up to deliver peak performance from the very first puff. This is where the real magic begins:

Best Flavor

A properly primed coil ensures the e-liquid vaporizes evenly, delivering the full, clean essence of your chosen flavor.

Maximum Vapor

Properly primed coils heat e-liquid more effectively, creating rich, satisfying vapor without any harsh burnt notes.

By priming your coils correctly, you ensure your device delivers the premium flavor and vapor production it’s built for. It’s just a few moments of preparation for hours of flawless vaping

Coil Service Life

Developing the habit of priming your coils goes beyond instant gratification—it’s a long-term investment in your vaping experience. A properly primed coil can maintain optimal performance for up to a week, guaranteeing that every draw remains as rich and flavorful as the initial one‌.‌

‌After this period, replacing your coils is essential to preserve that fresh taste. However, neglecting to prime your coils will likely result in more frequent replacements, diminishing both the quality and longevity of your vaping sessions‌

Avoid Premature Coil Feature

Priming your coils is like insurance against the dreaded dry hit—that harsh, burning sensation you experience when the coil’s wick isn’t properly saturated. Not only is it unpleasant for your taste buds, but it’s also a quick way to ruin your coil.‌

‌A dry hit can scorch the cotton inside the coil, and once that happens, the coil is effectively beyond repair. Priming isn’t just a precaution; it’s essential for maintaining smooth vaping and extending the life of your coils. Skip this step, and you’ll be left with a lingering burnt taste—a clear sign it’s time for a replacement.

How to keep your vape coils performing at their best

Maintaining your vape coils in excellent condition is key to achieving rich flavor and strong vapor production. Proper care and usage are essential for unlocking this secret.

E-Liquids

Selecting the right e-liquid is vital for extending the life of your coils. Similar to how you wouldn’t use diesel in a petrol car, you should avoid using high VG e-liquids with MTL coils, as they are not a compatible match.

      Use a compatible e-liquid with your coils 

Before you start vaping, ensure you’re aware of which e-liquids work well with your device. For example, high VG e-liquids are ideal for sub-ohm coils used in high-wattage vaping, while nic salts and freebase nicotine are better suited for low-powered pod kits designed for mouth-to-lung users.

Understand the type of e-liquid you’re using

Different e-liquids will have different effects on your coils. If you like those extra sweet juices, be prepared to replace your coils more often, as they are more prone to wearing down coils quickly. Whatever your preference, you should know how e-liquids affect your coils so you can always know when to replace your coils for the best experience.

Vaping Wattage

Getting your coil primed is just the start; you’ve also got to vape at the right power level to keep things running smoothly. Coils are made for either strong, high-power vaping or more relaxed, low-power use.

If you stick to the wattage that your coil is built for, you’ll get the best performance out of it. Pushing your coil too hard by cranking up the power too much can burn it out, while not giving it enough juice can mean weak vapour and a flat experience.

You need to find the sweet spot. Trust us, your vape will thank you by working better for longer.

New Coils

Whenever you swap in a new coil, don’t forget that priming is a must. It’s like a ‘welcome drink’ for your coil – it ensures the wick is fully soaked with e-liquid, so you get the full flavour from the first draw and avoid any burnt tastes.

And here’s a tip for when you’re just topping up your e-liquid: patience is a virtue. Give the liquid a few minutes to seep into the coil before you take a puff.

This mini-priming session helps to enhance the taste and can also extend the life of your coil. Just a little waiting time means you can enjoy a cleaner, better vape.

What to do next

Effective coil maintenance is essential for an outstanding vaping experience. Every step, from priming new coils to using the correct wattage, plays an important role in boosting flavor and prolonging coil life.

We recognize the intricacies involved in optimizing your vape, which is why we provide a wide variety of replacement coils and pods to accommodate every type of vaper.

Whether you’re into cloud chasing or are a flavor enthusiast, we have the perfect coil to ensure your vaping experience remains smooth and easy.